- Friday Oct 9,2009 05:49 PM
- By admin
- In Decoration

So be it by the phone next to your desk or the children, a filer is always a useful and practical piece to take home. will help you have your books and papal order and occupying much less space. Today we will like to make one old recycling bins.
Materials:
3 drawer wooden
3 tables
White paint
Gray paint
Brushes
Lija
Nails and Hammer
Step by step:
Start by sanding the boxes and tables. note that the tables should have the same width as the boards and the high should be about half the height of the drawers. Remove accumulated dust with a cloth and then proceeds to paint all the white pieces. Let dry well. If you want to give a second coat and let dry.
When everything is dry nails every table in front of the drawers in the lower zone. Writes with a fine brush in each table that will go inside the file, whether magazines, books or papers. Let dry well. When dry sand the edges of each to give an antique finish.
Finally paste the drawers together or vertically Hit him.
Incoming search terms:
- diy painting drawers
- breakfast ideas
- Rustic Room Ideas
- banio for small bathrooms
- kitchen with bar counter design ideas

- Friday Oct 9,2009 05:33 AM
- By admin
- In Decoration

Luckily there are people with ingenuity and imagination, because otherwise there would be such fun furniture as you explained below. With a few simple benches of wood, whether old or purchased, you can make, easy and fast, this unique shelf for your home.
Materials:
3 banks of wood of different sizes
3 paints of different colors
Brushes
Carpenter's glue
Screws
Step by step:
The first thing to do is to paint each of the banks in different colors. You can choose to degrade as the tones in the picture.
Once the three banks are painted and dry place the medium on the largest. With a pencil mark where the legs would be supported on the bank's medium-large. Put a little carpenter wave on each foot and let dry. Once the glue dries put a screw in each leg to hold on to the banks.
Do the same procedure on the smaller bank. Clever. It's easy to have a very original and decorative shelf to your room. And of course, remember to place ornaments, books and some other nice basket to hold everything.
Via | BHG
Incoming search terms:

- Friday Oct 9,2009 04:37 AM
- By admin
- In Decoration

A bench is always welcome in every home. Whether it is to get into the room and get to bed or high cabinets in the kitchen to grab things from the cupboards or higher for the children reach the sink. The truth is they are very useful, and this time we will do one very simple as wood.
Materials:
Wooden Table
sierra
Carpenter's glue
Nails and hammer
Painting
Step by step:

The first thing to do is cut the 7 pieces of wood. As you can see in the picture, cut two equal pieces begins as L. Cut two rectangles of equal width to the height of which are L-shaped and the length you want. Cut two rectangles with the same length and same width as the parts L. Finally, cut a rectangle of equal length all the pieces and a little lower than the height of the pieces L.

When you cut all pieces begins with the assembly. For that applies glue on the thickness of the front sides of the blocks L and place one of the tables that match the measurements. Clava several nails to secure both sides. Make the same with the remaining table.
Then perform the same procedure to place the two tables that function as stairs and finally, put the table back. When everything is nailed and carpenter's glue dry paint the piece and let dry. S you paste a piece of carpet on the stairs.
Via | Lowescreativeideas

- Friday Oct 9,2009 03:27 AM
- By admin
- In Decoration

No matter which side you're decorating the house, if we can find a piece of furniture in every room is a closet. If, in the kitchen, the study in the dining room, the bedroom … there is always at least a closet in every house.
But if yours is boring and you do not know what to do with the fun idea maybe today will be very useful. We decorate a simple closet door with our favorite photographs. A very simple and really decorative.
Materials:
Painting
Wooden photo frame without glass (the proper size according to size of closet doors)
Brushes
Varnish
Picture or decorative paper
Glue
Step by step:
The first thing to do is to sand the door if not in condition. He then proceeds to paint it the color that you like and let dry. If you think you need to apply a second coat. He also painted the picture frame.
Once the paint has dried paste the picture behind the frame. Finally paste the frame in the center of the door.
Via | BHG

- Friday Oct 9,2009 02:27 AM
- By admin
- In Decoration

If you do not know how to bring some color to a room, the cushions are the simplest answer. And the best part is that no precise buy new, you can recycle some old ones with simple and colorful appliqués leather. Today we will like it.
Materials:
2 Cushions
Clippings 50cm leather synthetic (3 colors)
Design choice
Pencil
Scissors
Glue gun
Step by step:

Choose a design, make the mold in cardboard and transfer it on the leather synthetic.
Cut out the design and presents the different combinations to see which is the best location of the figures on the pad.
Adhiérelo piece using glue gun.
Via | Biensimple
Incoming search terms:
- leather appliques
- ideas for cushions
- how to make leather appliques

- Friday Oct 9,2009 12:53 AM
- By admin
- In Decoration

We all know that the bathroom is one of those smaller rooms of the house, however, is one in which we must save more. But then, as no major furniture we must always seek the best solutions. So if you're looking to gain space and a fun touch, the organizer you as we do today is great.
Materials:
3 Buckets of zinc sheet
Tight timber 70 x 10 x 2.5 cm
White acrylic paint
Turquoise acrylic paint
Green acrylic paint
Violet Acrylic paint
3 brushes
2 self-drilling screws for wood
Screw Hooks
Electric drill
Screwdriver
Step by step:
Put in the wooden ends of the strap hangers and, using a drill, make 3 holes to 10 inches each, to locate the buckets. After all in white painted wood surface.
With acrylic paint, paint the exterior of the three buckets of different colors. Then paint the inside of them in white acrylic paint to give a better ending to work.
Via | Biensimple
Incoming search terms:
- fun bathroom ideas
- designer bathroom organizers
- ideas organizer house

- Thursday Oct 8,2009 05:43 AM
- By admin
- In Decoration

If you live in a loft is very possible that you have a large multipurpose environment that while it may be convenient, the fact remains that remains very private. So if you want to create a peaceful and secluded atmosphere you today as we make this separator.
Materials:
C / No simile cardboard timber
Scissors
Punch
C / n bolts with nuts
1 roll small tanza
4 or 5 hooks for roof
Step by step:

Choose a geometric figure and creating a mold. Then, transfer the pan to the cardboard sheets as often as you like, distributing it so that you make the most of the chosen material plates.
Cut out shapes and place, at the ends of each, small holes (the drill) to link them together.
Joins the pieces together and secure them using screws with nuts. Separator to hang from the ceiling, placed hooks, hangs on the front row tanza and attach one to another as you add the figures.
Incoming search terms:
- room divider ideas
- how to make a room divider
- ecologic chair carton sketch
- spacedividers carton
- geometric room divider

- Thursday Oct 8,2009 03:56 AM
- By admin
- In Decoration

In the simple things is the beauty of things, and although he can not believe this delicate, fine bench is made only in cardboard. Yes, with some old boxes you can get a very unique and original piece to give life to a corner of your room.
Materials:
Boxes
Glue
Tela
Step by step:
The first thing to do is cut the mold used to cut all the layers of cardboard. The form you choose is to your liking. What you must remember is that both the lower and the upper side should be straight and the bottom should be supported on the floor and the top will be the seat.
Once you use it as a cut piece mold and begins to cut identical pieces of cardboard. You're going to cut it until you are bored precise many layers to achieve a good thickness. When you paste you have all cut each other by matching the ends well. When finished gluing dried well.
Besides making a box or a box lid. Fórrala with paper or cloth of your choice and finally put it on the piece of cardboard glued together. So you already have ready your original bank.

- Thursday Oct 8,2009 03:33 AM
- By admin
- In Decoration

If you are of those people who leave messages on slips through the house's time to find a solution. Usually the people who do that is because it does not want to forget anything, but the roles were flying and lost, and the messages never reach their destination. So today I told you how to turn your refrigerator on a practice board. So you can write anything you want and everyone will see your messages.
Materials:
Painting of slate (the color that you like)
Brush
Fine grit sandpaper
Newspapers
Step by step:
Before placing the foot of the refrigerator several newspapers not to mess around. What to do now is gently sanding the front of the refrigerator until you feel the surface is a little rough. Remember that there is only sand just to make the paint do not skip. When finished either sanding dust removed with a rag.
When you finish with hand sanding gives a picture of slate to the entire front of the refrigerator and allow to dry. Apply a second coat, wait to dry and work ready.
Remember that while the painting of slate is generally black, the fact is that today there are brands that have this type of paint in varying shades. Be sure to choose the best fit with the decor of your kitchen.
Incoming search terms:

- Thursday Oct 8,2009 01:14 AM
- By admin
- In Decoration

Decorating your home is not just a matter of buying furniture and painting walls. The details are the true heroes and something as simple as a table center piece can be perfect for renovating your home. In this day and we will make these new and very simple centerpieces of cork.
Materials:
Cork Sheet
Scissors
Carpenter's glue or wood glue
Acrylic paints (optional)
Step by step:
Start by cutting a rectangle of cork the size that you like. If you want to color it's time to paint it the way you want. Let the paint dry thoroughly.
Once dry, paint what you've decided to make a cut perpendicular to the center of each end. Overlaps both sides at each end and glue. Hold a paper clip until dry and ready.
Incoming search terms:
- cork centerpieces
- centro de mesa
- innovative centerpieces
- cork centerpiece ideas
- cork decoration ideas
