Each house says a lot of people that live there. And it is a form of expression in it everything that we place. Therefore, to decorate, no detail can be left to chance. Making good decisions passing by to inform you, and this time you count the materials in the market to choose the floor of your home.

Tropical
There is a variety-teak, iroko, jatoba, merbau, etc … – and all have in common is their great hardness and resistance to moisture, thanks to its natural oils. To prevent rust and graying, they should apply special oils regularly.

Timber
Attractive and elegant hardwood floors are becoming more resistant and durable. Moreover, being available in a huge variety of colors and finishes to suit any style. For example, dark woods and even, in a layer, are perfect for modern settings.

Ceramic
Its low porosity makes them waterproof, hygienic and easy to clean. In addition, require no maintenance and are presented in such a broad range of sizes, colors and finishes that you will find it easy to find which best suits your tastes.

Laminates
These soils are made from compressed paper impregnated with resin. This is a hard coating, resistant and easy to clean. In addition, installation is simple and fast, does not need books and, in some cases can be placed without glue, joining with other tables.

Natural Stone
The range of stone flooring is wide and varied. The most commonly used are marble, granite, slate and limestone. These soils are very durable stand up well to wear, but they can be cold in sight; combine them with wooden furniture.

Synthetic
PVC flooring, resilient and very flexible, are perfect for the kitchen as they are waterproof and easy to clean. But his great decorative possibilities, coupled with its quick and easy installation, makes a good choice for any room in the house.

Via | Micasarevista

When decorating, put to work is the best way to save money. To paint, wallpaper or place your floors do not need more than good advice. No need to call a professional if you do not have money, you yourself can change your story. Today we will like to place in just ten steps.

Materials:

Laminate Flooring
Baseboard moldings
Moldings adaptation and expansion
Solvent-based asphalt waterproofing (1 bucket of 19 liters pays 19 m2)
Under carpet of 1 / 4 "plastic
White glue
Silicone cartridge
Wood screws

Step by step:

1. The first thing you do is vacate the area in which you work.

2. Next, apply the solvent-based asphalt impermeablizante white (preferably) on the floor, which serves to protect your floor from possible moisture and is essential if the placement is done on the ground floor.

3. Place the support under carpet with a spare on each side of 3 CMY is fixed to the walls.

4. To start the next step you should decide which figure you're going to drop, then we recommend the traditional placement, however if you want you can place diagonally, in the form of snail or some other figure that comes to mind. But what you should not lose sight of is that you put the staves so that they do not match the start or the court with terminición a contiguous staves, except that it is the perimeter of the area, as can be seen in the figure below.

5. For placement of the floor, parts of the stave unite with white glue "dovetailing" the songs, leaving a separation of 1.5 cm walls around the perimeter of the floor for the floor work freely with temperature changes. To make the cut in the staves, you can use a jig in the absence of a hacksaw.

6. The perimeter to leave withthe separation wall is covered with a mold called Zocalo, which you can stick with silicone or screwed to the walls. is recommended that it be the same color of the floor.

7. The next step is to cut the doors that open toward the floor, where it will be placed, and this is necessary, because the ground rises from 1 to 1.5 cm.

8. At the joints of the floor with other floors, moldings are placed according to the case. For example, with floors at different levels, are used to finish adjusting trim. With floors at the same level of expansion moldings are used, without forgetting that these frames should also be the same color of the floor.

9. Ready for you to leave the floor, you should clean with a damp cloth to remove stains caused by excess glue.

10. Finally, you must rearrange the furniture, they avoid being dragged to avoid scratching or abusing the floor.

Via | Makerwiki

Upon thinking about the story of a house we imagine the vast majority of wood, with that as rustic and natural finish, with a charm and warmth that almost no other material does give us. But the truth is that there is more to choose from than ever we have in mind.

When thinking of the floors for our home it is true that there are other fine materials and durable wood besides that we must consider. Often overlooked and indeed, given its advantages, we may even prove better than the woods.

Flats such as stoneware, marble or terrazzo are extremely durable and beautiful materials, and today we will each of them to choose your best option.

If you choose to place stoneware floor, keep in mind that it is ideal for bathrooms, kitchens, hallways and receivers for its great strength and durability compared to much use. It's really easy to clean, its price is moderate, although their parts are serious.

If you lean for marble, remember that, being a natural stone appearance is altered with time. It is optimal for living rooms and bathrooms and comes in black, pink, maroon, cream and green. Its beauty is undeniable and despite the wear and tear maintenance is also very simple.

By opting for the terrazzo, know that is inexpensive, very durable and functional for your rooms, especially if the room is for kids who are always fouling and hitting things. Remember if it outdoors, rain and dirt can darken a lot and it is difficult to clean.